Primochill Hardline/Rigid Watercooling Tubing Finishing Bit (Rfb) - Ream/Deburr/Trim - 10Mm Id X 12Mm Od

Are You Constantly Trying To Deburr Your Rigid Tube By Hand? Stop Hand Cranking That Cheap Plastic Reamer! The Primochill Rfb (Rigid Finishing Bit) Is A Standard Size Drill Bit With The Power To Save You Time And Energy While Giving A Perfectly Finished Tubing End. The Rfb Can Be Used At Mid To Low Rpm To Smooth Out The End Of Your Tube With No Effort. Crank Up The Rpms And You Can Customize The Length Of The Tube As Well. This Functionality Allows You To Rough Cut Your Rigid Tube And Then Fine Tune It To The Perfect Length With Clean Ends. Custom Fitting Your Rigid Tube Is Now So Much Easier!Featuresdesigned To Fit Standard Drillssealed Bearings That Allow For Scuff-Free Spinning Specificationscompatibilitymaterial: Petg, Pmma (Due To Extremely Quick Dulling Of The Bit, Copper Tubing Is Not Recommended.)Parts Included 1X Rigid Finishing Bit (Assembled)Warningspractice Using The Rfb On Some Scrap Rigid Or Cut Longer Than Needed Until You Get The Hang Of How Fast Or Slow The Bit Will Remove Material.Not Responsible For Any Damage Caused By Or When Using This Product. Please Use At Your Own Risk.